Top Lab Equip
The Dry Block Thermostat is designed for maintaining constant temperatur of samples in tubes. It is device controlled by a microcomputer, has high temperature control accuracy and good parallelism in sample preparation. It can replace the traditional water bath device and can be widely used in the cultivation, preservation and reaction of various samples. The application industry covers medicine and chemical industry, food safety, quality inspection, environment, etc.
Features:
- Temperature and time LED display.
- Real-time temperature display and time-decreasing display.
- Automatic fault detection and buzzer alarm function.
- Temperature offset calibration function.
- Easy module replacement for easy cleaning and disinfection.
- Built-in over-temperature protection device.
Specification:
| Model | PB200-1 | PB200-2 | PB200-4 |
| Picture |  |
|
|
| Temperature range | Room temperature +5°C – 150°C | Room temperature +5°C – 150°C | Room temperature +5°C – 150°C |
| Timing | 1min-99h59min | 1min-99h59min | 1min-99h59min |
| Temperature control accuracy | ≤±0.5 °C | ≤±0.5 °C | ≤±0.5 °C |
| Display accuracy | 0.1°C | 0.1°C | 0.1°C |
| Temperature uniformity | ≤±0.5 °C | ≤±0.5 °C | ≤±0.5 °C |
| Heating time (25°C-100°C) | ≤10 minutes | ≤10 minutes | ≤10 minutes |
| Number of modules | 1 | 2 | 4 |
| Heating power | 150W | 400W | 600W |
| Fuse | 250V 1.5A Ф5*20 | 250V 3A Ф5*20 | 250V 3A Ф5*20 |
| Dimensions (mm) | 218*240*95 | 218*260*95 | 218*340*95 |
| Weight | 3.5kg | 4.5kg | 5.7kg |
